Knowledge Base

What actually changed in PPWR

A directive became a regulation, and vague packaging rules became measurable ones with a conformity file. What that swap changes for a converter, an importer and a brand owner. The change of instrument is the change.

Download the communication guide
Download the communication guide
Get the guide

In short

  • The change of instrument is the change. A directive that 27 states each transposed became one regulation that applies directly.
  • Packaging already had general requirements under the directive. Under PPWR they become measurable limits, grades and percentages, backed by a technical file and a declaration of conformity.
  • Little of that arrived on 12 August 2026. The PFAS limits, the claims rule and the conformity file did. Labelling comes from late 2028, most design requirements from 2030.

PPWR replaced Directive 94/62/EC, and the swap from a directive to a regulation is the substantive change rather than a technicality. Regulation (EU) 2025/40 applies directly in every Member State without national transposition, so the rules themselves stop varying by country. The directive already set general requirements for packaging. PPWR turns them into measurable ones, covering substances, recyclability, recycled content, minimisation, labelling and reuse, and requires a manufacturer to prove conformity in a technical file before packaging goes on the market. It binds by role in the chain, not by size.

What is the actual difference between what was there and what is there now?

What changedDirective 94/62/ECRegulation (EU) 2025/40
InstrumentA directive. Each Member State transposed it into its own lawA regulation. Directly applicable, no national transposition step
Practical effect on rulesTwenty-seven national packaging regimes with a common minimumOne text, one set of product requirements
Product requirementsGeneral essential requirements: minimise weight and volume, minimise hazardous substances, allow reuse or recoveryMeasurable requirements: substance limits, recyclability grades, recycled content shares, empty space ratios, harmonised labels
Proof of compliancePresumed where packaging met the harmonised standards. No EU-wide conformity fileConformity assessment, technical documentation and an EU declaration of conformity before placing on the market
Who it reachesLargely the producer as defined nationallyManufacturers, importers, distributors, fulfilment service providers and EPR producers, by role
Size thresholdNationalNone in general. Article-specific micro-enterprise carve-outs only
Environmental claimsNot addressedArticle 14 restricts claims about properties the regulation regulates, and requires substantiation in the technical documentation

Why does the directive-to-regulation change matter in practice?

Because it removes the step where your obligation was written by someone else.

Under a directive, the text you had to comply with was your Member State's transposition, which could arrive late, go beyond the minimum, or use different definitions from the country next door. A packaging business selling into six markets was reading six rulebooks and reconciling them.

A regulation removes that layer. What is written in Regulation (EU) 2025/40 is what applies to you, on the date the regulation says, without waiting for a national act. That is why the application date, 12 August 2026, is a single date rather than twenty-seven.

One thing did not become uniform. Enforcement stays national, so who inspects and what a sanction looks like is still answered by national law even though the rule itself is not.

What changed about who is caught?

The test moved from a national definition of a producer to a set of roles in the chain, and the roles are broader.

The regulation names manufacturers, importers, distributors, fulfilment service providers and producers for extended producer responsibility purposes. Fulfilment service providers are named as economic operators in their own right, so an online seller cannot assume the packaging rules stop at its own warehouse door.

The other change is what is absent. There is no general turnover or headcount threshold. A small converter is inside the product requirements in a way it would not be under a reporting regime like CSRD. The micro-enterprise carve-outs that do exist are written into individual articles, all keyed to Recommendation 2003/361/EC as applicable on 11 February 2025, and they cover the reuse targets in Article 29, the refill and reuse duties on final distributors in Articles 32 and 33, and a shift of the manufacturer's obligations where a micro-enterprise brand owner is supplied from within the same Member State. That is a list, not a principle.

What started on 12 August 2026, and what did not?

For the packaging itself, three things started. The design requirements are scheduled for later.

The conformity file. Under Article 15, a manufacturer has to carry out a conformity assessment, draw up the technical documentation in Annex VII and an EU declaration of conformity before placing packaging on the market. That is new: the directive had no such file.

Substance limits. Food-contact packaging may not be placed on the market with PFAS at or above the Article 5(5) limits: 25 ppb for a single PFAS by targeted analysis, 250 ppb for the sum of targeted PFAS and 50 ppm including polymeric PFAS. The heavy metal limit in Article 5(4), 100 mg/kg for lead, cadmium, mercury and hexavalent chromium combined, is not new. The directive set the same limit. What changed is that you now have to show you meet it in the technical documentation.

Environmental claims. Article 14. A claim about a packaging property PPWR regulates may only be made where the packaging exceeds the applicable minimum requirement, must state whether it relates to the unit, part of the unit or all packaging you place on the market, and must be demonstrated in the Annex VII technical documentation.

What did not start. Recyclability grading, minimum recycled content, packaging minimisation, the Annex V format bans, reuse targets and the maximum empty space ratio are 2030 obligations, and several of them can move later. Harmonised labelling and waste receptacle labels apply from 12 August 2028 at the earliest, and later in practice, because the Commission did not adopt the labelling implementing acts by their August 2026 deadline. Separate collection objectives and deposit and return system minimum requirements are 2029.

If a source tells you recycled content or pictograms changed in 2026, it has read the application date and stopped there.

Which widely repeated change did not happen at all?

The 40 percent cap on empty space in e-commerce parcels. It is wrong on both halves.

Article 24(1) sets the maximum empty space ratio for grouped, transport and e-commerce packaging at 50 percent, and it applies from 1 January 2030 or three years after entry into force of the implementing act adopted under Article 24(2), whichever is the latest. That implementing act is not due until 12 February 2028, so the obligation can only land later than 2030, never sooner.

What is real and nearer is the other limb of the same article. By 12 February 2028, operators filling sales packaging must reduce empty space to the minimum necessary. That is a standard applied to the filling operation, and it arrives before the ratio does.

What has not changed?

Two things worth stating because the volume of coverage implies otherwise.

PPWR is not a carbon rule and never became one. There is no carbon footprint, no emissions inventory and no product carbon footprint requirement anywhere in it. It is a materials and waste regime. The reason it appears in carbon conversations is that it lands on the same person, and that its material composition data is the input an EPD needs.

It was not delayed. It has applied since 12 August 2026, as Article 71 says. Industry groups asked for a postponement during 2026, and no amendment changing that date is in force. The one Commission proposal that touches PPWR, part of a December 2025 simplification package, would suspend the duty to appoint an authorised representative for extended producer responsibility. It is a proposal, and it does not move the application date.

What does this change about the data you keep?

It moves the centre of gravity from tonnages placed on the market toward composition per packaging item.

Under the old regime the reporting question was largely how much packaging you put out and what happened to it. The new requirements ask what a given packaging unit is made of, at component level, in enough detail to answer a substance limit today and a recycled content percentage or a recyclability grade later, and to put that answer in a technical file. That is a specification dataset rather than a waste return.

The overlap with carbon work runs through that same dataset. Material by polymer or grade is what a product footprint is built from, so a converter assembling PPWR evidence is part-way to an EPD without having set out to be. The Hedgehog platform covers the organisational carbon side of that picture and reports 5,000+ users on its platform page. The limitation to name before anyone assumes it doubles as a compliance file: a small business reviewer on G2 in August 2026 said loading the data is manual and takes real effort, and works well once loaded. For a converter with hundreds of grades, that is an honest description of the first month of either project.

If the gap is the footprint rather than the packaging rules, that is carbon footprint consulting work, and our claims checklist covers the Article 14 side.

Sources: Regulation (EU) 2025/40 (OJ L, 2025/40, 22 January 2025), Directive 94/62/EC (Article 11 and Annex II), European Commission news item of 11 August 2026, Hedgehog platform, Hedgehog on G2. Verified 22 November 2026.

Facts on this page were last verified on 2026-11-22.

Frequently asked questions

No items found.
Start free version on Hedgehog Carbon Platform
Start free version on Hedgehog Carbon Platform
Start for free

Start free version on Hedgehog Carbon Platform

Start your carbon footprint with the free version of our Hedgehog Carbon Platform

This article is written by:
Joost
Joost
Co-Founder
Send emailLinkedInBook a meeting

Get in touch

Whether you are a large or small business, a start-up or a company with a long history, offering a product, process, or service, we respond swiftly and support you in taking your next step.