Knowledge Base

What data does PPWR actually need?

Not emissions. PPWR runs on composition per packaging component, substance evidence and a technical file. What you need now, and what 2028 and 2030 add. The unit of data is the packaging component, not the company and not the year. Composition has to resolve below the level of the finished pack.

Download the communication guide
Download the communication guide
Get the guide

In short

  • The unit of data is the packaging component, not the company and not the year. Composition has to resolve below the level of the finished pack.
  • Nothing in PPWR asks for an emissions figure. Every dataset it needs is materials, substances, dimensions or a document.
  • Since 12 August 2026 every manufacturer needs Annex VII technical documentation and an EU declaration of conformity before packaging goes on the market. Claims are substantiated in the same file.

PPWR needs composition data, not carbon data. The regulation has applied since 12 August 2026 and it binds by role in the packaging chain rather than by size, so a small converter needs the same dataset as a large one. It asks what each packaging component is made of, evidence that it stays under the substance limits in Article 5, and a technical file that shows conformity before the packaging goes on the market, which is also where any environmental claim is substantiated. There is no emissions inventory requirement anywhere in it. Labelling, recycled content, recyclability grade and dimensions join the dataset from 2028 and 2030.

What is the unit of data?

The packaging component, and getting this wrong is the most expensive early mistake.

Article 5(4) sets its heavy metal limit as the sum of lead, cadmium, mercury and hexavalent chromium in packaging or a packaging component, at 100 mg/kg. The limit itself is not new, the old Packaging Directive had the same one, but it now has to be demonstrated in the technical documentation. A component is a label, an adhesive, an ink layer, a closure, a barrier film. A dataset that resolves only to "carton, 250 gsm" cannot answer that question, because the ink and the varnish are inside the test and outside the record.

So the structure you need is a bill of materials per packaging specification, with each component carrying its material identity, its supplier and the evidence attached to it. Everything else on this page hangs off that structure.

What data does each obligation actually need?

ObligationApplies fromData it needsWhere it comes from
Article 15 technical documentation and EU declaration of conformity12 August 2026Description, drawings and materials of components, the standards applied, and the evidence for each applicable requirementYour specifications plus supplier information, which Article 16 obliges suppliers to provide
Article 5(5) PFAS limits in food-contact packaging12 August 2026Evidence against 25 ppb for any single PFAS by targeted analysis, 250 ppb for the sum of targeted PFAS, 50 ppm for PFAS including polymericSupplier declarations plus laboratory analysis for food-contact specifications
Article 5(4) heavy metals12 August 2026The summed concentration of lead, cadmium, mercury and hexavalent chromium per packaging or component, against 100 mg/kgSupplier declarations at component level
Article 5(1) substances of concern12 August 2026Evidence that they are minimised in the packagingFormulation and specification records
Article 14 environmental claims12 August 2026Proof that the packaging exceeds the minimum requirement, plus whether the claim covers the unit, part of the unit, or all packaging you place on the marketYour own technical file
Article 24(4) empty space in sales packaging12 February 2028Volumes showing empty space is reduced to the minimum necessaryFilling operations
Article 12 and 13 harmonised labelling12 August 2028 at the earliestMaterial composition expressed in the harmonised schemeThe same component data, reformatted
Article 7 minimum recycled content1 January 2030 at the earliestRecycled content share in plastic packaging, traceable per polymerSupplier evidence, per batch or per grade
Article 6 recyclability grades A, B or C1 January 2030 at the earliestDesign and material data sufficient to grade the packagingSpecification data plus the grading methodology
Article 10 minimisation and Article 24(1) 50 percent empty space ratio1 January 2030, the ratio possibly laterDimensions, fill volumes and a justification of what is necessaryDesign and filling operations

The labelling date needs a note. Article 12 applies from 12 August 2028 or 24 months after the Commission's implementing acts, whichever is later. Those acts were due by 12 August 2026 and were not adopted by then, so labelling will apply later than August 2028.

Why is the technical documentation the real deliverable?

Because it is the file that has to exist before the packaging goes on the market, and it has been required since 12 August 2026.

Article 15 says a manufacturer carries out the conformity assessment, draws up the technical documentation in Annex VII and, where conformity is shown, an EU declaration of conformity before placing packaging on the market. Annex VII asks, among other things, for a general description of the packaging, its design drawings and the materials of its components. The file has to be kept for five years for single-use packaging and ten for reusable packaging, and handed to a national authority within ten days of a reasoned request.

Article 14 adds claims to the same file. An environmental claim about a packaging property PPWR regulates may only be made where the packaging exceeds the applicable minimum requirement, and that has to be demonstrated in the Annex VII documentation. The claim is therefore not a marketing output with evidence somewhere behind it. The evidence is part of the compliance file, and the claim is only allowed because the evidence exists.

Three properties of the claims part follow from the article. It has to be scoped, because the claim must state whether it relates to the unit, part of the unit, or all packaging placed on the market, and the evidence has to match. It has to be comparative, because exceeding the minimum requirement is the condition for making the claim at all. And it has to be current: artwork designed three years ago and still printed today is a claim on packaging placed on the market today.

Our claims checklist sets out what substantiation of this kind looks like in practice, since Article 14 sits alongside consumer claims rules rather than replacing them.

Which data do you not need?

An emissions figure, and this is the sentence most worth reading twice.

PPWR creates no greenhouse gas accounting obligation. No corporate inventory, no scope 1, 2 or 3 breakdown, no product carbon footprint. If a request cites PPWR and asks for tonnes of CO2 equivalent, the requirement being invoked does not exist in that regulation.

You also do not need most of what is being sold as PPWR readiness this year. Recyclability grading, recycled content percentages, minimisation and empty space ratios are 2030 obligations, and most of them carry a clause that can push them later still. Collecting that data now is a design decision, not a compliance one, and it should be justified on its own terms.

Where does the data overlap with a carbon footprint?

At the material line, and only there.

The composition dataset PPWR forces you to build, material by polymer or grade, at component level, with supplier attribution, is the same input an EPD or a product carbon footprint runs on. A converter that has answered Article 5 properly is a long way toward being able to answer a customer asking for a figure per thousand units, which is the request that actually arrives in packaging.

What does not transfer is the direction of the work. PPWR asks whether a substance is under a limit. A footprint asks how much of a material was bought and what factor applies to it. The same source record answers both, but the queries are different and the outputs are not interchangeable.

What does this mean for where you keep it?

Keep the compliance evidence with the specification, and the carbon data with the purchasing volumes.

The Annex VII file is a document set attached to a packaging specification, and it needs to be producible on demand for a particular pack. That belongs in whatever system holds your specifications, not in a reporting tool.

The organisational carbon inventory is a separate deliverable with a separate cadence. The Hedgehog platform covers that side, carries over 20,000 spend-based and activity-based factors that you can supplement with your own supplier-specific data, and reports 5,000+ users on its platform page. The limitation to weigh if you were hoping one system would hold both: a mid-market reviewer on G2 in July 2026 rated it 4 out of 5 and asked to be able to see the conversion factor and the distance calculator applied to their input data. For an Article 14 file that traceability is the requirement, so that evidence needs to live where you can show every step.

If the constraint is that supplier-specific material data does not exist yet, that is a value chain data problem with a long calendar and belongs in scope 3 consulting rather than in a compliance sprint. And if you are choosing tooling for the organisational side for the first time, our guide to choosing the right carbon accounting software sets out the questions to ask.

Sources: Regulation (EU) 2025/40 (OJ L, 2025/40, 22 January 2025), Directive 94/62/EC Article 11, European Commission news item of 11 August 2026, Hedgehog platform, Hedgehog on G2. Verified 22 November 2026.

Facts on this page were last verified on 2026-11-22.

Frequently asked questions

No items found.
Start free version on Hedgehog Carbon Platform
Start free version on Hedgehog Carbon Platform
Start for free

Start free version on Hedgehog Carbon Platform

Start your carbon footprint with the free version of our Hedgehog Carbon Platform

This article is written by:
Joost
Joost
Co-Founder
Send emailLinkedInBook a meeting

Get in touch

Whether you are a large or small business, a start-up or a company with a long history, offering a product, process, or service, we respond swiftly and support you in taking your next step.